Verlagslink DOI: 10.1177/0954406215571462
Titel: Experimental and numerical analysis of fillet-welded joints under low-cycle fatigue loading by means of full-field techniques
Sprache: English
Autor/Autorin: Corigliano, Pasqualino 
Crupi, Vincenzo 
Fricke, Wolfgang 
Friedrich, Nils 
Guglielmino, Eugenio 
Schlagwörter: low-cycle fatigue test;welded ship structure;digital image correlation;thermographic analysis;finite element analysis
Erscheinungsdatum: 5-Feb-2015
Verlag: Sage Publications
Quellenangabe: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 7 (229): 1327-1338 (2015)
Zeitschrift oder Schriftenreihe: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 
Zusammenfassung (englisch): The welded structures used in the naval field are generally subjected to fluctuating stress over time. In some structural welded details, due to changing loading conditions, significant elastic-plastic deformation can arise, which may lead to the failure of the structure after a relatively low number of cycles. The aim of this scientific work was to investigate the behavior of welded T-joints under low-cycle fatigue using full-field techniques: digital image correlation and infrared thermography. Low-cycle fatigue tests were carried out on welded “small-scale” specimens with the aim of obtaining loading and boundary conditions similar to those that occur in “large-scale” components in their real operating conditions. A nonlinear finite element analysis was also performed. The material curves, relative to different zones (base material, heat-affected zone, weld), were obtained by hardness measurements, which were done by means of a fully automated hardness scanner with high resolution. This innovative technique, based on the ultrasonic contact impedance method, allowed to identify the different zones (base material, heat-affected zone, weld metal) and to assess their cyclic curves, which were considered in the finite element model. Finally, the finite element model was validated experimentally comparing the results with the measurements obtained using the digital image correlation technique. The applied procedure allows providing useful information to the development of models for the prediction of fracture and fatigue behavior of the welded joints under the low-cycle fatigue loading.
DOI: 10.15480/882.1584
ISSN: 2041-2983
Institut: Konstruktion und Festigkeit von Schiffen M-10 
Dokumenttyp: (wissenschaftlicher) Artikel
Lizenzhinweis: Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich. This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.
Enthalten in den Sammlungen:tub.dok

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat 
0954406215571462.pdfVerlags-PDF2,2 MBAdobe PDFMiniaturbild
Zur Langanzeige


Letzte Woche
Letzten Monat
checked on 21.10.2018


checked on 21.10.2018

Google ScholarTM


Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt.