Dieses Dokument steht unter einer CreativeCommons Lizenz by-nc-nd/4.0
Verlagslink DOI: 10.1016/j.ijmecsci.2015.12.007
Titel: Modeling of fracture in small punch tests for small- and large-scale yielding conditions at various temperatures
Sprache: English
Autor/Autorin: Soyarslan, Celal 
Gülçimen Çakan, Betül 
Bargmann, Swantje 
Hähner, Peter 
Schlagwörter: Ductile–brittle transition;Small punch test;Gurson–Tvergaard-Needleman plasticity;Ritchie–Knott–Rice model
Erscheinungsdatum: 18-Dez-2015
Verlag: Elsevier
Quellenangabe: International Journal of Mechanical Sciences (106): 266-285 (2016-02-01)
Zeitschrift oder Schriftenreihe: International journal of mechanical sciences 
Zusammenfassung (englisch): We present a systematic numerical study on temperature dependent fracture mode change in small punch tests. Following Needleman and Tvergaard (2000), we model the material as thermo-inelastic, where the ductile fracture mode, by void nucleation, growth and coalescence is accounted for by Gurson's porous metal plasticity (Gurson, 1977). The brittle fracture mode by cleavage is accounted for by Ritchie-Knott-Rice's deterministic maximum principal stress criterion (Ritchie et al., 1973). The well-known problem of mesh dependence associated with softening material behavior is remedied by using an integral type nonlocal formulation similar to that presented in Tvergaard and Needleman (1995). Two length scales are incorporated into the constitutive relations: the ductile fracture length scale is based on the average inclusion distance and associated with the nonlocal evolution equation for the porosity. The brittle fracture length scale is based on the average grain size and associated with the material region at which the maximum principal stress is averaged out. The material model is used to simulate small punch tests at -196°C, -158°C and 25°C of notched and unnotched specimens of P91 steel representative for small- and large-scale yielding conditions, respectively. The simulated fracture modes and patterns show a very good agreement with experiments: for -196°C brittle fracture propagating normal to the maximum (tensile) principal stress prevails. For 25°C ductile fracture is governed by shear localization with voidage. The simulations also show that the deformation energy is considerably higher for the upper shelf tests compared to the lower shelf tests.
URI: http://tubdok.tub.tuhh.de/handle/11420/1885
DOI: 10.15480/882.1882
ISSN: 0020-7403
Institut: Kontinuums- und Werkstoffmechanik M-15 
Dokumenttyp: (wissenschaftlicher) Artikel
Enthalten in den Sammlungen:tub.dok

Dateien zu dieser Ressource:
Datei Beschreibung GrößeFormat
1-s2.0-S0020740315004245-main.pdfVerlags-PDF7,28 MBAdobe PDFÖffnen/Anzeigen
Zur Langanzeige

Seitenansichten

3
Letzte Woche
0
Letzten Monat
checked on 10.12.2018

Google ScholarTM

Prüfe

Export

Diese Ressource wurde unter folgender Copyright-Bestimmung veröffentlicht: Lizenz von Creative Commons Creative Commons