Verlagspublikation: Journal of the European Ceramic Society ; 31.2011,4, pp. 531-540
Verlagslink: http://dx.doi.org/10.1016/j.jeurceramsoc.2010.11.006
Titel: Influence of small cyclic and DC electrical loads on the fracture toughness of ferroelectric ceramics
Sprache: Englisch
Autor/Autorin: Engert, Andrea Raphaela
Neumeister, Peter
Mecklenburg, Matthias
Jelitto, Hans
Balke, Herbert
Schneider, Gerold A.
Institut für Keramische Hochleistungswerkstoffe
Schlagwörter: Ermüdung;ferroelektrische Eigenschaften;Bruchmechanik;PZT;AC;fatigue;ferroelectric properties;fracture;PZT;AC
Erscheinungsdatum: 2011
Quellenangabe: Journal of the European Ceramic Society ; 31.2011,4, pp. 531-540
Zusammenfassung (englisch): The present work investigates the influence of small AC, unipolar cyclic and DC electric loads on the fracture toughness of a ferroelectric ceramic. Single-edge-notched beams (SENB) of a poled and unpoled lead zirconate titanate (PZT) ceramic were fractured in a four-point-bending device under conditions of controlled crack growth. During crack advance the different electrical loads were applied perpendicular to the crack faces. The applied nominal electric field amplitudes were less than one third of the coercive field and maximum frequencies of 20 kHz were applied. The measured R-curves show that even for these low amplitudes, electrical AC loading causes a drop in the critical mechanical load of up to 25%. The drop increases with increasing amplitude and frequency. Possible mechanisms to explain the results are discussed.
URI: http://tubdok.tub.tuhh.de/handle/11420/990
URN: urn:nbn:de:gbv:830-tubdok-10813
DOI: 10.15480/882.988
Institut: Keramische Hochleistungswerkstoffe M-9
Advanced Ceramics M-9
Dokumenttyp: ResearchPaper
Enthalten in den Sammlungen:tub.dok


Alle Ressourcen in diesem Repository sind urheberrechtlich geschützt.